Free dust collection resources
Free dust collection tools for woodworking shops
Answer your dust collection questions in a few minutes, with the same math our team uses. What are you working on?
Free, no sales call. Updated by Höcker North America.
Planning a system
Plan a new or bigger system
Start with your airflow, then add up your duct runs to size the fan. Smaller shop? See if one mobile collector covers it.

How much airflow do my machines need?
- CFM today and in 5 years
- Main duct size and filter area
- The Höcker setup for your shop

How hard does my fan have to work?
- Your runs, elbows and filters added up
- Static pressure in in. wg
- The fan and motor size it takes

Can one mobile collector cover my shop?
- The right Vacumobil model
- CFM and duct size
- What is included
Printables for the shop floor
Rather walk the shop with a pencil first? Print these, then bring your numbers to the calculators above.

What ducting do I have now?
- Every run, elbow and branch
- Blast gates, clamps and flex hose
- Fill it in on screen or print it

What ports do my machines have?
- Every machine and its ports
- CFM at 4,500 ft/min, added up for you
- Your total to check against the CFM calculator

How fast should air move in each duct?
- CFM for 3 to 35 inch pipe
- Air speeds from 1,000 to 7,500 ft/min
- Pressure loss for galvanized steel pipe
Running costs
Cut your running costs
See what your fan costs to run, what you lose in winter by blowing heated air outside and what your wood waste is worth.

What does my collector fan cost to run?
- Your yearly fan energy cost
- Savings with variable frequency drives
- Savings over 20 years

What does blowing heated air outside cost me?
- Cost per hour, week and winter
- Your state's fuel prices built in
- What return air keeps inside

What do I do with my wood waste?
- The right BrikStar press
- How much your waste shrinks
- What it is worth as fuel
Safety
Get NFPA 660 ready
See where your shop stands on NFPA 660, the combustible dust standard, in 10 plain-English questions.
Rather have us do it?
Send us your machine list. We run the numbers.
Our team sizes the system and estimates your savings at no cost. Real shops, real results:
Or call 616.881.6698.
Quick answer
What free dust collection tools does Höcker North America offer? Six calculators, an NFPA 660 checklist, a duct airflow check and three printable sheets. The calculators size airflow (CFM), add up static pressure and size the fan, pick a Vacumobil mobile collector, show what variable frequency drives save on fan energy, price winter heat loss, and size a BrikStar briquetting press. The NFPA 660 checklist scores your readiness in about 3 minutes.
Questions
Free resources FAQ
Are these dust collection tools really free?+
Yes. The calculators, the duct airflow check and the NFPA 660 checklist are free to use. The three sheets download right away with no email needed. Add your name and email if you want a copy sent to your inbox.
Which tool should I start with?+
Start with what you are working on. Planning a new or bigger system? Start with the CFM calculator, since everything else builds on your airflow number. Cutting costs on a system you have? Start with the energy calculator. Getting ready for an inspection? Take the NFPA 660 checklist.
How fast should air move in a woodworking dust collection duct?+
At least 4,000 feet per minute in branches and mains, so dust stays in the air instead of settling in the duct. Höcker designs at 4,500 for margin as filters load up. Use the duct airflow check on this page to see what each size carries.
How many CFM does my dust collector need?+
Add up the CFM of every machine on the system, with every gate open, then add the machines you plan to buy in the next 5 years. The CFM calculator shows your demand today and in 5 years, with main duct size, fan HP and filter area.
How much energy can variable frequency drives save on a dust collector?+
A single fan running at full speed while only 7 of 10 machines are working uses about twice the power it needs. Variable frequency drives and automatic blast gates slow the fans to match the machines that are running. The energy calculator estimates your savings.
What does blowing dust collector air outside cost in winter?+
At the U.S. average commercial gas price, exhausting 10,000 CFM when it is 38°F colder outside costs about $5 an hour in heat. The heat loss calculator uses your ZIP code, airflow and fuel to price your shop.
What does NFPA 660 require of a woodworking shop?+
NFPA 660 is the combustible dust standard that replaced NFPA 664 for woodworking. It calls for a current Dust Hazard Analysis, a dust collector located and protected for explosion risk, isolation and spark control, and grounded metal ductwork. The NFPA 660 checklist shows your gaps.
Can Höcker size a system for me?+
Yes. Send us your machine list and a few photos and our team will size the system and estimate your energy savings at no cost. Contact us or call 616.881.6698.
